Club Pack of 100 C7 White Christmas Light Bulb Sockets - For 16 Gauge Wire

Club Pack of 100 C7 White Christmas Light Bulb Sockets - For 16 Gauge Wire Reviews



More Picture


BRClub Pack of 100 Christmas Light Bulb Sockets BRItem #V471917 BRColor: White BRSocket Size: C7 BRMaterial(s): Plastic BRFor use with 16 gauge wire BRPack includes 100 of the item shown Pb/Note: This ad is only for the light sockets as shown in the photo, there are no cords or bulbs included./b


Go tO Store Now !!

More Products

More Reviews




Oct 31, 2010 17:31:04
0 comments
Labels: ,

J Bend, 20 Gauge x 1 1/2" Chrome Plated

J Bend, 20 Gauge x 1 1/2" Chrome Plated Reviews



More Picture


J Bend, 20 Gauge x 1 1/2" Chrome Plated Feature

  • "PLUMB PAK" J-BEND
  • Size: 1-1/2"
  • 20 Gauge
  • Made of Brass
  • Chrome Plated, Less cleanout
Less cleanout.


Go tO Store Now !!

More Products

More Reviews




Oct 30, 2010 22:22:05
0 comments
Labels: ,

Finish Nails, 2 1/2" x 15 Gauge

Finish Nails, 2 1/2" x 15 Gauge Reviews



More Picture


Finish Nails, 2 1/2" x 15 Gauge Feature

  • National Nail 2-1/2X15Ga 33Ang Finish Nail 603154
  • NATIONAL NAIL CORP
Use for interior trim and moldings.B FITS: /BDepoan PN6612/DA21, DeWalt D51275K, EZ DA50, Fasco R4-BA65 CT, Hitachi NT65AA, Hitachi NT65MA2, Jamerco JTAFN1464A, Porter Cable DA250B, Senco AirFree, Senco Finish Pro, Senco SFN-1, Senco SFN-2B, Senco SFN-30, Senco SFN-40, Trusty TY1341564DA.


Go tO Store Now !!

More Products

More Reviews




Oct 30, 2010 06:15:05
0 comments
Labels: ,

Wayne Home Equipment 66017-WYN Pressure Gauge

Wayne Home Equipment 66017-WYN Pressure Gauge Reviews



More Picture


Wayne Home Equipment 66017-WYN Pressure Gauge Feature

  • If You have the right tools You can complete any job!
  • We have 8 warehouses in the U.S. so you will get your order Fast!
  • Warehouse Locations: p Cape Girardeau,MOpMedina,OHpLexington,SCpMontgomery,NYpDixon,ILpWaco,TSpWoodburn,ORpMesquite,NV.
2" diameter. Gives dependable readings to 100 lb. for water or air pressure. No. 66015 WYN: 1 4" pipe connection and brass pipe adapter No. 66017 WYN: 1 8" pipe connection, aluminum pipe adapter, and back mount


Go tO Store Now !!

More Products

More Reviews




Oct 28, 2010 17:14:03
0 comments
Labels: , ,

PacTool International SA903 2-Piece Gecko Gauge Hardi Board Siding Gauges

PacTool International SA903 2-Piece Gecko Gauge Hardi Board Siding Gauges Reviews



More Picture


Excellent product!!! Easily eliminates the amount of people needed and speeds up the time to put up hardi boards. This was one of the best purchases I've made for doing a specific project. It made the job easier, quicker, precise, and less hands were needed. The first hardi board still had to be installed with 2 people holding the board at the popped chalk line we made, to make sure the board was put on level. After that first board along the bottom, away you could go with only 1 or 2 people (no further chalk lines needed). I would highly recommend this to anyone installing hardi boards. I installed 8 1/4" hardi boards. I believe these gauges do not work on the 12" hardi boards, but does work for boards smaller than 12" in width.

PacTool International SA903 2-Piece Gecko Gauge Hardi Board Siding Gauges Feature

  • One-person siding installation
  • Each course stays level
  • Consistent siding reveal
  • Reduces time-consuming layout
  • Currently this tool is Zone 10 specific
For siding installation, similar to SA902, but this newer model will not scratch pre-painted siding. Heavy-gauge plastic helps avoid marring the painted surface. One person can install fiber cement siding while ensuring each course stays level. Adjusts for a 5, 6", 7" or 8" reveal. Sold in a set of two."


Go tO Store Now !!

More Products

More Reviews

Useful but with flaws - Robin Bernstein -
Never heard of siding gauges until I looked into products for installing cement board siding. They seemed an ideal product for the task and we decided to get the PacTool Gecko Gauge. They are certainly easy to use, but given their limited purpose, we were disappointed with a couple of things: when the gauge is clamped in place, the top pulls away from the siding leaving a gap wide enough for the board it is supporting to slide behind the gauge. The board won't fall down, but it is annoying if it happens before you get the first couple of nails in. This compounds the second drawback which is that adjustments in the height of the gauge can't be "dialed in" as they can with another product; the gauge must be unclamped, adjusted slightly and re-clamped, hopefully in the right position and without the board sliding behind the gauge. Still a worthwhile product despite what we thought was a somewhat high price.

Indispensable - Ed Everett -
Being a life-long sceptic, I wasn't sure I needed these to complete my siding project. Boy, was I wrong. They are invaluable whether you are siding with a helper or by yourself. I had made some jigs to aid in maintaining a consistent reveal while installing the siding, but they required that you hold the jig and the siding, a tiring prospect, especially at the end of the day when you are 25' high on a ladder. So, despite the seemingly high price for these devices, I wouldn't look back in a second.


Oct 28, 2010 04:25:05
0 comments
Labels: , , ,